Phillips X/C 20W50 Aviation Oil

Not rated
 
Magnifier
 
  • 1 of 4

Phillips 66 X/C Aviation Oil 20W-50 is an ashless dispersant, multigrade engine oil specially formulated for year-round use in aircraft piston engines. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines.

Price from €120,28 incl. VAT
from €99,41
Brand Phiillips 66 Lubricants
Category Oils & Lubricants
Warranty 2 years
Choose variant
Phillips X/C 20W50 Aviation Oil (Balení oleje 208l) Product code P 20W50/4X1 G Case 4x 1 galon In stock €119,62
€144,74 incl. VAT
   
Phillips X/C 20W50 Aviation Oil (Balení oleje 208l) Product code P 20W50/208L 208l In stock €1 605,52
€1 942,68 incl. VAT
   
Phillips X/C 20W50 Aviation Oil (Balení oleje 208l) Product code P 20W50/12X 1Q 12x 1 quart In stock €99,41
€120,28 incl. VAT
   
 

 

Phillips 20w50 aviation oil maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils.

Phillips XC 20w50 was the first FAA-approved mineral oil-based, ashless dispersant, multiviscosity aviation engine oil. It has more than 30 years of outstanding, proven performance in a wide variety of aviation uses, including flight schools, charter and cargo airlines, acrobatic aircraft, spray planes, race planes and virtually any other general aviation application. It is available throughout the United States and is exported to other countries around the world.

Benefits

  • Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
  • Easier starting and faster oil circulation at low temperatures compared with single-grade oils
  • Reduced warm-up time and cooler operating temperatures compared with single-grade oils
  • High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures
  • Provides cleaner and quicker break-in than traditional all-mineral, non-additized, single-grade oils
  • Protects against rust and corrosion
  • Reduces oil consumption in most engines
  • Suitable for year-round use

Application

This product is recommended for use in opposed piston engines. It can replace Commercial Grade 65, 80 or 100 single-grade engine oils with no sacrifice in performance.

This oil is recommended for use during break-in and then as the operational oil until TBO.

Product data sheet 66 XC Aviation Oil TDSw 027440

Be the first who will post an article to this item!

Add a comment
Do not fill out this field: